Is your sink drain clogged? With a few number of inexpensive tools and a little whip of a practice, you can clear up even the most stubborn clogs. Take note, this can be done in less than an hour. You do not need to go through the hassle of calling a plumbing service to do it for you. Save time and money. Simply follow the instructions on clearing blocked drains:
- Have a good head start. Outset on getting the right tools.
A clogged kitchen can definitely crash a perfectly good evening in front of the television. Rather than watching your favourite series, you might end up staring at your stinky sink. On the back of your mind, pondering if it is about time to call a plumber. However, all you really need are a plunger and a snake.
Plungers can be purchased at any hardware store or home centre. For more thrust, opt for larger rubber bells. However, it will work better for kitchen drains. In order for you to apply more force, make sure that your plunger has a stout handle.
A snake is also known as a hand auger. Depending on its length, size and turning mechanism, it can be cheap to expensive.
- With the use of a plunger, clear the blockage.
In order to seal the sink drain, hold a wet cloth firmly. Then, set the plunger by the other drain. Forcefully, plunge up and down for about 20 seconds.
If there is no problem in the disposer, go ahead and plunge the drain.
- Clear-up the P-trap.
Break-up the slip nut on trap arm assembly. Later, continuously taste tee and twist the trap free. Go ahead and check the waste tee and removed. If it is clogged, clean it.
Kindly take note that clogs usually occur in the P-trap and trap arm of a drain. More often than not, it materializes when coffee or grease sticks.
- Snake the line.
Insert the tip of the snake into the drain stub-out. Cramp the setscrew and clock-wisely, turn the rank. As a result, it will feed into the drainpipe.
Start by loosening the setscrew at the tip of the snake. At that moment, pull out 6 to 10 inches of cable. Toughen the setscrew and spin the snake down onto the drain line. At first, you may feel that there is an obstruction. It is most probably that the snake is twisting a corner. Unleash the setscrew and pull out another 6 to 10 inches of cable. Continue feeding the snake into the line.
If you need help clearing blocked drains, contact a professional from Guardian Plumbing by checking out the link.