DIY Handyman: How to Clear Your Clogged Sink

5867776Is your sink drain clogged? With a few number of inexpensive tools and a little whip of a practice, you can clear up even the most stubborn clogs. Take note, this can be done in less than an hour. You do not need to go through the hassle of calling a plumbing service to do it for you. Save time and money. Simply follow the instructions on clearing blocked drains:

  1. Have a good head start. Outset on getting the right tools.

A clogged kitchen can definitely crash a perfectly good evening in front of the television. Rather than watching your favourite series, you might end up staring at your stinky sink. On the back of your mind, pondering if it is about time to call a plumber. However, all you really need are a plunger and a snake.

Plungers can be purchased at any hardware store or home centre. For more thrust, opt for larger rubber bells. However, it will work better for kitchen drains. In order for you to apply more force, make sure that your plunger has a stout handle.

A snake is also known as a hand auger. Depending on its length, size and turning mechanism, it can be cheap to expensive.

  1. With the use of a plunger, clear the blockage.

In order to seal the sink drain, hold a wet cloth firmly. Then, set the plunger by the other drain. Forcefully, plunge up and down for about 20 seconds.

If there is no problem in the disposer, go ahead and plunge the drain.

  1. Clear-up the P-trap.

Break-up the slip nut on trap arm assembly. Later, continuously taste tee and twist the trap free. Go ahead and check the waste tee and removed. If it is clogged, clean it.

Kindly take note that clogs usually occur in the P-trap and trap arm of a drain. More often than not, it materializes when coffee or grease sticks.

  1. Snake the line.

Insert the tip of the snake into the drain stub-out. Cramp the setscrew and clock-wisely, turn the rank. As a result, it will feed into the drainpipe.

Start by loosening the setscrew at the tip of the snake. At that moment, pull out 6 to 10 inches of cable. Toughen the setscrew and spin the snake down onto the drain line. At first, you may feel that there is an obstruction. It is most probably that the snake is twisting a corner. Unleash the setscrew and pull out another 6 to 10 inches of cable. Continue feeding the snake into the line.

If you need help clearing blocked drains, contact a professional from Guardian Plumbing by checking out the link.


Best Seat In The House

If you’ve ever had the privilege to put a home together, you know how important and fulfilling an experience it can be. It is indeed one that people tend to look forward to all their lives, especially if it is a home of their own. Once the paperwork and financing is all wrapped up, the design and decoration phase can be a truly enjoyable and freeing one – a homeowner can figure out how best to balance their personality and taste with the practical needs of the home. However, this need to balance also makes this phase a somewhat nerve-wracking one. This is perhaps best illustrated by the need to avoid choosing the flashiest or most interesting piece as opposed to one that works the best. After all, the coolest item can break or otherwise fail, and that would leave the home in quite the lurch.

Even the bathroom, a commonly overlooked but supremely important room in the household, is one where breakage cannot be an allowable issue. As such, choosing the elements that go into a bathroom – such as the toilet, a daily-use but underappreciated item – should not be done without a lot of thought. Fortunately, that decision can be guided by a few guidelines.

1.    You get what you pay for, so don’t cheap out – some contractors will indeed offer you less expensive deals that seem a great deal cheaper at the outset, but these might be for parts and equipment at the lower end of the quality spectrum. They’re likely to have gotten them for similarly low prices, and that cannot be without a reason.
2.    Keep your feet on the ground. You might find unique features to be a lot of fun, but they can actually be impractical for more than just their initially higher price – specialized flushes, automatic seats and so on can be pretty cool, but good luck finding inexpensive replacement parts for this niche equipment.
3.    Select your model carefully. Standard gravity models and pressure-assist models each have their own advantages. For example, a pressure-assist model will probably use less water, which could result in savings down the line. Study flush ratings online as well, so you can choose a design that performs to your expectations.
4.    Design is also an important consideration, so look at how well it matches your bathroom. Beyond design, of course, look at practical concerns – a wall-hung toilet might be unusual for some, but it is one of the models that tend to be easier to clean.

If you need to a good plumber to fix your toilet repairs, call Guardian plumbing & gas by visiting this link:

Bye Bye Block

Being a homeowner is a tremendous responsibility for anyone. It stands to reason that making such a large investment would call for a level of maturity and accountability that allows for the proper upkeep and maintenance of the house. A house is a big responsibility, after all, and taking good care of it will call for the homeowner to be familiar with the requirements of each part of the house. Different rooms call for different sorts of care, and the parts of each room also require particular knowledge of upkeep and management. While you can spend the money on hired repair and upkeep, this is not always the wisest choice.

For example, when it comes to clearing blocked drains Melbourne has no shortage of professionals with good records and capability who can help. This costs money, though, and sometimes quite a bit. While they can certainly make house calls and help you fix the problem, this tends to jump the gun and not even always be necessary – you can take a few steps yourself in order to try and fix things without needing a professional. This can fix the problem, save you a bit of cash and allow you to gain insight into how things work. One sort of fix employs the use of vinegar and hot water.

Step one is to pour vinegar into the drain. ¼ of a cup of vinegar is usually enough to start with. Let the vinegar stand for 20 minutes or more, so as to let it take effect on the clogging material. As an alternative, you can use ¼ of a cup of vinegar mixed in with ¼ of a cup of baking soda. This combination will create a foaming action that should have a stronger effect on the clogging material. After this you can try pouring in boiling water.

The next step involves the use of a plunger. Using this on the drain creates suction on it, which should serve to agitate the material that has clogged the drain. Most people try an additional step here to try and help, which involves blocking the sink overflow. This helps the plunger create the necessary suction that will help force the blocking material to shift and move. Following this, pour another round of hot water into the drain, letting it drain through. This process may be repeated until the alternating suction and heat of the water breaks down the clogging material. After some repetition the drain will become clear thanks to these factors as well as the nature of the baking soda and/or vinegar.

If you are looking for a plumber in Melbourne, head over to to know more details about Scott Berkefeld at Guardian plumbing & gas.