DIY Handyman: How to Clear Your Clogged Sink

5867776Is your sink drain clogged? With a few number of inexpensive tools and a little whip of a practice, you can clear up even the most stubborn clogs. Take note, this can be done in less than an hour. You do not need to go through the hassle of calling a plumbing service to do it for you. Save time and money. Simply follow the instructions on clearing blocked drains:

  1. Have a good head start. Outset on getting the right tools.

A clogged kitchen can definitely crash a perfectly good evening in front of the television. Rather than watching your favourite series, you might end up staring at your stinky sink. On the back of your mind, pondering if it is about time to call a plumber. However, all you really need are a plunger and a snake.

Plungers can be purchased at any hardware store or home centre. For more thrust, opt for larger rubber bells. However, it will work better for kitchen drains. In order for you to apply more force, make sure that your plunger has a stout handle.

A snake is also known as a hand auger. Depending on its length, size and turning mechanism, it can be cheap to expensive.

  1. With the use of a plunger, clear the blockage.

In order to seal the sink drain, hold a wet cloth firmly. Then, set the plunger by the other drain. Forcefully, plunge up and down for about 20 seconds.

If there is no problem in the disposer, go ahead and plunge the drain.

  1. Clear-up the P-trap.

Break-up the slip nut on trap arm assembly. Later, continuously taste tee and twist the trap free. Go ahead and check the waste tee and removed. If it is clogged, clean it.

Kindly take note that clogs usually occur in the P-trap and trap arm of a drain. More often than not, it materializes when coffee or grease sticks.

  1. Snake the line.

Insert the tip of the snake into the drain stub-out. Cramp the setscrew and clock-wisely, turn the rank. As a result, it will feed into the drainpipe.

Start by loosening the setscrew at the tip of the snake. At that moment, pull out 6 to 10 inches of cable. Toughen the setscrew and spin the snake down onto the drain line. At first, you may feel that there is an obstruction. It is most probably that the snake is twisting a corner. Unleash the setscrew and pull out another 6 to 10 inches of cable. Continue feeding the snake into the line.

If you need help clearing blocked drains, contact a professional from Guardian Plumbing by checking out the link.


Sound Advice For Plumbing Maintenance And Repair

ID-100216378It’s common for plumbing problems to happen right after buying a house. The kitchen and the bathroom are the most common places that plumbing problems occur. Practically everyone will experience problems with their plumbing at some point in their lives. Using the following tips will help you with plumbing issues.

Plumbing that constantly squeaks, pounds, and emits other noises is irritating but, fortunately, the problem is often easily fixed. You simply have to securely fasten any pipes that are exposed. Get a professional to anchor any hidden pipes if you do not wish to do some work in your floors or walls by yourself.

As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.

Certain things shouldn’t go into your plumbing system. By knowing what you can and cannot flush or throw into the garbage disposal and sink, you can save yourself from a costly repair or disaster. A plumber can usually get your plumbing back into working condition, but can be avoided if you know how to dispose of items correctly.

Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.

Check your gas water heater periodically to make sure the pilot flame is lit. The correct color for this flame should be blue. The tip of the flame should be yellow. If you find that you are only seeing a yellow flame, you may need to call a professional for safety reasons.

Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can’t do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.

The worst thing you can do is to be unprepared when a plumbing problem arises. Always keep some basic tools on hand, and try to have some idea of how your plumbing works, as well as what to do in the event of an emergency. Should plumbing issues arise, you can use the advice in this article to help you.

If you’re having a plumbing problem, big or small, contact an expert, reliable plumber from Guardian Plumbing & Gas by following the link provided:

Best Seat In The House

If you’ve ever had the privilege to put a home together, you know how important and fulfilling an experience it can be. It is indeed one that people tend to look forward to all their lives, especially if it is a home of their own. Once the paperwork and financing is all wrapped up, the design and decoration phase can be a truly enjoyable and freeing one – a homeowner can figure out how best to balance their personality and taste with the practical needs of the home. However, this need to balance also makes this phase a somewhat nerve-wracking one. This is perhaps best illustrated by the need to avoid choosing the flashiest or most interesting piece as opposed to one that works the best. After all, the coolest item can break or otherwise fail, and that would leave the home in quite the lurch.

Even the bathroom, a commonly overlooked but supremely important room in the household, is one where breakage cannot be an allowable issue. As such, choosing the elements that go into a bathroom – such as the toilet, a daily-use but underappreciated item – should not be done without a lot of thought. Fortunately, that decision can be guided by a few guidelines.

1.    You get what you pay for, so don’t cheap out – some contractors will indeed offer you less expensive deals that seem a great deal cheaper at the outset, but these might be for parts and equipment at the lower end of the quality spectrum. They’re likely to have gotten them for similarly low prices, and that cannot be without a reason.
2.    Keep your feet on the ground. You might find unique features to be a lot of fun, but they can actually be impractical for more than just their initially higher price – specialized flushes, automatic seats and so on can be pretty cool, but good luck finding inexpensive replacement parts for this niche equipment.
3.    Select your model carefully. Standard gravity models and pressure-assist models each have their own advantages. For example, a pressure-assist model will probably use less water, which could result in savings down the line. Study flush ratings online as well, so you can choose a design that performs to your expectations.
4.    Design is also an important consideration, so look at how well it matches your bathroom. Beyond design, of course, look at practical concerns – a wall-hung toilet might be unusual for some, but it is one of the models that tend to be easier to clean.

If you need to a good plumber to fix your toilet repairs, call Guardian plumbing & gas by visiting this link:

Bye Bye Block

Being a homeowner is a tremendous responsibility for anyone. It stands to reason that making such a large investment would call for a level of maturity and accountability that allows for the proper upkeep and maintenance of the house. A house is a big responsibility, after all, and taking good care of it will call for the homeowner to be familiar with the requirements of each part of the house. Different rooms call for different sorts of care, and the parts of each room also require particular knowledge of upkeep and management. While you can spend the money on hired repair and upkeep, this is not always the wisest choice.

For example, when it comes to clearing blocked drains Melbourne has no shortage of professionals with good records and capability who can help. This costs money, though, and sometimes quite a bit. While they can certainly make house calls and help you fix the problem, this tends to jump the gun and not even always be necessary – you can take a few steps yourself in order to try and fix things without needing a professional. This can fix the problem, save you a bit of cash and allow you to gain insight into how things work. One sort of fix employs the use of vinegar and hot water.

Step one is to pour vinegar into the drain. ¼ of a cup of vinegar is usually enough to start with. Let the vinegar stand for 20 minutes or more, so as to let it take effect on the clogging material. As an alternative, you can use ¼ of a cup of vinegar mixed in with ¼ of a cup of baking soda. This combination will create a foaming action that should have a stronger effect on the clogging material. After this you can try pouring in boiling water.

The next step involves the use of a plunger. Using this on the drain creates suction on it, which should serve to agitate the material that has clogged the drain. Most people try an additional step here to try and help, which involves blocking the sink overflow. This helps the plunger create the necessary suction that will help force the blocking material to shift and move. Following this, pour another round of hot water into the drain, letting it drain through. This process may be repeated until the alternating suction and heat of the water breaks down the clogging material. After some repetition the drain will become clear thanks to these factors as well as the nature of the baking soda and/or vinegar.

If you are looking for a plumber in Melbourne, head over to to know more details about Scott Berkefeld at Guardian plumbing & gas.

Handy Around The Bathroom

clearing blocked drains melbourne

clearing blocked drains melbourne

Owning a house is truly a momentous part of one’s life, said to be the biggest investment that one can make in his lifetime. This is not without reason, as houses do not come cheap – buying and then maintaining them can take a lot out of a wallet. Money is not everything, however, and a larger part of owning a house has to do with taking care of it and maintaining everything in it. This includes rooms that might commonly escape notice or seem to not require maintaining – something as simple as a blocked toilet or train can be surprisingly problematic. Dealing with a blocked toilet or drain by yourself is far from impossible, although for such toilets and blocked drains Melbourne has plenty of professional help available.

Step one would be to cover the overflow vent or opening with a wet cloth. This is usually easier for drains and tubs and such than for sinks, which usually do not have such a vent. No matter the case, covering the overflow opening will be essential for the plunger in the next step to do its work properly.

Take a plunger and coat its lip with petroleum jelly – this coating is optional but will help you create a better seal. Fill the basin or tub in question with enough water to cover the bell shape of the plunger cup as you slide the cup over the drain hole. Then, rapidly pump the plunger in an up-and-down motion. In about ten to twelve firm plunging strikes, during which you should feel water flowing around the plunger, finish by pulling the plunger up in a quick jerk. Water should rush out in response.

Alternatively, a chemical drain unclogger can be used. This will help melt down whatever substances are causing the block, but should be avoided for completely clogged drains – the caustic agents in the chemicals can harm the internal fixtures.

One other alternative is a drain-and-trap auger, which allows you to snake the drain with a twistable, manipulable flexible wire. This may help to drill through and thus break up the blockage inside and give you clear path that you can then clear even further with other means.

Click on this link to know more about Guardian Plumbing:

Block Out

New homeowners typically have a lot to look forward to, and more to learn, when they begin to actually occupy and live in their new home. They first of all find that the challenging process of acquiring the house is but the beginning of a larger journey, as ownership tends to make a person realize that there are plenty of demands made by a new house on a person. Maintaining each part of the house is in and of itself a large life lesson to be picked up incrementally from day to day, and one might find himself having to relearn a lot of the things he had gotten used to over his lifetime. This is made especially true by the way that each part of the house has unique needs and demands of its own that must be learned and then addressed accordingly in order for the whole household to run smoothly.

blocked drains melbourne

blocked drains melbourne

For example, the bathroom tends to be an easily-overlooked room of the house that actually causes great deal of inconvenience if ignored or not maintained. Homeowners are thus often found looking for professionals skilled at unclogging toilets or clearing blocked drains Melbourne is one such place that sees homeowners with problems like this. If your own bathroom is in similar disrepair or facing similar issues, looking for professional help may be a good ultimate solution, but you can start checking it out and taking care of it yourself.

Facing a blocked toilet or drain on your own would certainly be a noble if trying endeavor. Nevertheless, a house-savvy homeowner would be best served to learn some initial steps in figuring out the problem and thus figuring out what to do about it. A good first step would be to verify the toilet system used by your particular unit. This can usually be done by as simple a motion as opening up the toilet tank, which can reveal the inner workings of the toilet system – as well as what could be going wrong inside it. This can range from a flapper that has gotten stuck and has prevented the tank from filling properly, to a valve that is causing flow issues.

To know more about clearing blocked drains, visit Guardian Plumbing at:

Get Rid Of The Blockage

The less aware might occasionally make the mistaken assumption that acquiring a house is the ultimate step in the trials that initiate a potential homeowner. This is in turn followed or accompanied by the assumption that actually living a homeowner’s life is a carefree, easy existence after the hard part is done. The reality, of course, is far different. There is a great deal more to be done after a house is purchased, and this means that the homeowner must keep learning and adapting after buying the house, and that growth never really ends.

Maintaining a house that one has acquired may be a challenging pursuit, but it is ultimately also fulfilling. A homeowner seeking to learn how to do this needs to open himself up to figuring out how things are done, how things work, and how to keep things working well. This helps a writer form a sense of self-reliance, avoiding an overreliance on outside help. For a homeowner on a budget, this is essential.

A homeowner who is new to the routing might find himself having to relearn how to understand and approach the different parts of the house. This is because experienced and new homemakers alike sometimes mistakenly take some parts of the house for granted, not expecting that much work to be needed only to find that they have made a huge mistake. For example, when the bathroom is overlooked and thus not taken as seriously as it should be, people fail to account for how essential it actually is. Losing the functionality of a bathroom because of toilet blockage or other reasons can lead to a great deal of inconvenience.

However, dealing with toilet blockages is not as difficult as one may think. There are some methods that can help a homeowner deal with problems of toilet workings. This can help people manage simple blockages by themselves; blocked toilets Melbourne can often be dealt with through some easier means than calling in help.

For example, one could try using hot water and liquid soap. Step one involved pouring half a cup of the soap into the blocked toilet bowl. This will then be allowed to sit for 15 minutes, after which a pot of boiling hot water is poured in. After 15 more minutes, a plunger is then used on the toilet for five plunges. A simple blockage is usually cleared up after this initial phase, but this process can be repeated if problems persist.

If you think the problem is beyond your skills and knowledge in basic toilet repair, call a professional Plumber in Elsternwick, Elwood, Caulfield.  Visit the official Guardian Plumbing website at by clicking on the link to know more information.